JM TURBO TECHNOLOGY JM-C-06 Engine Diesel Turbocharger 3116

( Brand: Jm Turbo Technology ), ( Manufacturer Part Number: JM-C-06 ), ( Oe/oem Part Number: 3116 ), ( Type: Turbocharger ), ( Features: Individual ), ( Placement On Vehicle: Front ), ( Manufacturer Warranty: Yes )

Review JM TURBO TECHNOLOGY For Caterpillar Engine Diesel Turbocharger

The JM Turbo JM-C-06 3116 Caterpillar engine diesel turbocharger is an advanced component designed to enhance the performance and efficiency of Caterpillar diesel engines. This turbocharger, specifically modeled for Caterpillar engines with serial number 3116, is a key element in the forced induction system, providing compressed air to the engine, resulting in increased power output and momentum at a lower engine speed.

This JM Turbo model is renowned for its robust design, capable of withstanding the extreme temperatures and high pressures present in heavy-duty diesel engines. The compressor wheel and turbine wheel are meticulously engineered to optimize airflow, ensuring minimal pressure drop and consistent boost level. Furthermore, the turbine housing is designed with provision for water or air cooling, maintaining optimal operating temperatures for maximum efficiency.

The JM-C-06 3116 turbocharger comes with a high-performance wastegate for controlling exhaust gas flow, which aids in maintaining consistent engine power and prevents overboosting that could potentially cause damage. The turbocharger's compressor cover and housing are manufactured using high-strength aluminum alloy, ensuring durability and weight reduction.

A key highlight of this turbocharger is its compatibility with a wide range of fuel types, including diesel, making it an ideal choice for diverse industrial applications. Additionally, its ability to meet stringent emission standards is further evidence of JM Turbo's commitment to producing top-tier turbocharging solutions.

The JM-C-06 3116 Caterpillar diesel turbocharger is designed and manufactured adhering to ISO and OEM standards, offering reliable performance and longevity. Its efficient design characteristics minimize power loss, resulting in reduced fuel consumption, improved engine responsiveness, and overall increased productivity. For engine applications requiring increased output and responsiveness, the JM Turbo JM-C-06 3116 turbocharger is an excellent solution.

Pros and Cons of Buying JM Turbo JM-C-06 3116 Caterpillar Engine Diesel Turbocharger

The JM Turbo JM-C-06 3116 is a popular aftermarket turbocharger for Caterpillar diesel engines. This turbocharger offers several advantages over the stock unit, including increased horsepower and torque. However, like any aftermarket part, it also comes with some drawbacks. In this article, we will discuss the pros and cons of buying a JM Turbo JM-C-06 3116 diesel turbocharger.

1. Performance: The JM Turbo JM-C-06 3116 is designed to provide significant gains in horsepower and torque compared to the stock turbocharger. This results in improved engine performance, increased power output, and better responsiveness.

2. Durability: Caterpillar is known for building robust and durable engines, and the JM Turbo JM-C-06 3116 continues this tradition. It is made of high-quality materials, including stainless steel and heat-resistant alloys, ensuring it can withstand the rigors of heavy-duty applications.

3. Compatibility: The JM Turbo JM-C-06 3116 is designed to fit various Caterpillar diesel engines, including 3116 models and others. This wide compatibility makes it a popular choice for those looking to upgrade their engines.

4. Customization: The JM Turbo JM-C-06 3116 can be customized to meet the specific needs of the user. This includes options for various exhaust manifolds, wastegates, and air intake systems.

5. Easy installation: The JM Turbo JM-C-06 3116 can be installed without requiring extensive modifications to the engine. This makes it a popular choice among both professional mechanics and DIY enthusiasts.

1. Cost: The JM Turbo JM-C-06 3116 is a premium aftermarket turbocharger and comes with a higher price tag compared to the stock unit. This may be a deterrent for some buyers.

2. Complexity: Compared to the stock turbocharger, the JM Turbo JM-C-06 3116 is more complex, which can make troubleshooting any potential issues more challenging.

3. Larger size: The JM Turbo JM-C-06 3116 is larger than the stock unit, which can make fitting it into tight engine compartments more difficult.

4. Fuel consumption: Although the JM Turbo JM-C-06 3116 provides significant power gains, it also increases fuel consumption. This can lead to higher operating costs over time.

5. Requires maintenance: While the JM Turbo JM-C-06 3116 is durable, it still requires regular maintenance to ensure optimal performance. This includes regular oil changes and checks for leaks.

The JM Turbo JM-C-06 3116 is an excellent choice for those looking to upgrade their Caterpillar diesel engine with a high-performance turbocharger. Its advantages include increased power output, durability, wide compatibility, customization options, and relatively easy installation. However, it also comes with some drawbacks, such as a higher cost, complexity, larger size, increased fuel consumption, and the need for regular maintenance. Ultimately, the decision to buy the JM Turbo JM-C-06 3116 depends on the user's specific requirements, budget, and preferences.

If you are looking for a high-performance turbocharger for your Caterpillar diesel engine and are willing to invest in a premium aftermarket part, the JM Turbo JM-C-06 3116 is an excellent choice. Its benefits include significant power gains, durability, and compatibility with various Caterpillar engines. However, consider the potential drawbacks, including the cost, complexity, larger size, increased fuel consumption, and the need for regular maintenance, before making your final decision.

Details:

As long as the wheel is not touching housing, you are fine. You forget to take the piece of tape and install Turbo. Your old Turbos Demise. Application: Caterpillar Earth Moving with 3116 Engine.

The oil flow into the Turbo has nowhere to go and gets pumped out bearing seals. These two gaps combined allow the compressor wheel tip to move side in what may look like an alarming amount. There is a gap between the shaft and sleeve housing. Common Installation Problem: Compressor Wheel Damage.

There should be no play axially in and out with the compressor wheel shaft. If your Turbo does this, check the oil drain for blockage, remove it and start up again. When re-installing the Turbo, be sure that you take out any rags anything else used to block off inlet's or inter cooler hoses. James Bond Smoke: You were doing some grinding or porting near the motor with Turbo removed.

For 3116 Caterpillar Engine Diesel Turbocharger: Engine. But if you killed a fairly new Turbo for no apparent reason, think about what could have been the cause of Turbos failure. This is normal. Parts must be in new, re-salable condition.

Also a plugged up crank case vent will cause excessive pressure to build in the crankcase. You blocked off the Turbo oil drain pipe with a piece of tape. This prevents the oil from draining out of Turbo and blows excess through seals. This is a direct bolt on aftermarket Turbo.

The Shaft is Rocky. Start it up and instant James Bond smoke. Same performance as the factory Turbo with better price.

part #: jmc06 prices

• $400.00-$423.88

specifications turbiparts:

• for makes: Caterpillar
• brand: Jm Turbo Technology
• mpn: Jm-c-06
• oe/oem part number: 3116
• type: Turbocharger
• features: Individual
• placement on vehicle: Front
• manufacturer warranty: Yes

returns turbiparts:

• time: 30 Days
• policy: Returns Accepted
• paid by: Buyer

general turbiparts:

• Air Fuel Delivery > Turbos, Superchargers Intercoolers > Turbos Parts
• condition: New

shipping turbiparts:

• carrier: FedEx
• class: Standard, Expedited, One-day
• service: FedEx Ground or FedEx Home Delivery, FedEx Express Saver, FedEx 2Day, FedEx Standard Overnight
• transit: 3-7 Days
• cost: $0.00
• type: Calculated

seller turbiparts:

• # reviews: 5422
• rating: 98.3%
• city: Alhambra, California

payments turbiparts:

• wallet: Google-pay
• other
• credit card: Diners-club

offer turbiparts:

• availability: In Stock
• options: Ship-to-home
• started: December 9, 2024
• sold: 0
• best offers: True

Jm Turbo Technology JM-C-06 Is Similar To:

• Jm Turbo Technology Jm-f-twin6.4 Turbocharger For Ford F250 F350 Super Duty 6.4l 08-10 High Low Pressure (44.2% similar) James bond smoke: you were doing some grinding or porting near the motor with Turbo removed. Same performance as the factory Turbo with better price. For ford f-series 6.4L power stroke diesel 08-10 Turbo charger high low pressure pressure: fit: f-series F250, F350, F450, F550. You forget to take...(January 13th, 2025)
• Jm Turbo Technology 13879880003 New Turbocharger For International I766 Maxxforce 13 B3ns 2006-2009 (42% similar) When re-installing the Turbo, be sure that you take out any rags anything else used to block off inlet's or inter cooler hoses. The shaft is rocky. There should be no play axially in and out with the compressor wheel shaft. Also a plugged up crank case vent will cause excessive pressure to build...(February 21st, 2025)
• Fram Extra Guard C630 75-63 Engine Oil Filter For 1961-1970 Pontiac Tempest Change Jm (23.5% similar) Frame extra guard engine oil filter for 1961 -1970 Pontiac tempest change Jm: status: in stock...(March 16th, 2025)
• Jm Turbo Technology Jm-c-07 2 For 3126 Caterpillar C7 Charger Replacement (73.3% similar) Engine: caterpillar truck with c7 engine. These two gaps combined allow the compressor wheel tip to move side in what may look like an alarming amount. 3126 caterpillar c7 Turbo charger. Reference part numbers: 269-2919, 269-2920, 2692919, 10R3280, etc. There should be no play axially...(June 10th, 2025)
• Jm Turbo Technology Jm-d-3-3 91-04 Freightliner Fl50 60 70 For Cummins 6ct 8.3l I6 Hx40w T4 Turbocharger (54.1% similar) There is a gap between the shaft and sleeve housing. Flange size: T4. These two gaps combined allow the compressor wheel tip to move side in what may look like an alarming amount. This is normal. You blocked off the Turbo oil drain pipe with a piece of tape. James bond smoke: you were...(June 11th, 2025)
• Jm Turbo Technology Jm-t-7 8 Fit Toyota Supra Lexus Soarer Jzz30 Twin Turbocharger 1990-1996 Ct12 1jz-g (50% similar) This prevents the oil from draining out of Turbo and blows excess through seals. Parts must be in new, re-salable condition. This is normal. Your old Turbos demise. James bond smoke: you were doing some grinding or porting near the motor with Turbo removed. But if you killed a fairly new...(June 11th, 2025)
• Jm Turbo Technology 12709700074 New For 2009-2012 Maxxforce 11 13 15 I783 Low Pressure Turbocharger (54.5% similar) Turbo part numbers, 3005700C93, 5011058R91, 3007664C94, etc. Your old Turbos demise. There should be no play axially in and out with the compressor wheel shaft. Also a plugged up crank case vent will cause excessive pressure to build in the crankcase. This is normal...(September 10th, 2025)
• Rein C151 34-60 Rear Turbo Oil Supply Line For 2007-2010 Bmw 335i 3.0l L6 Turbocharger Jm (41% similar) Rein rear Turbo oil supply line for 2007 -2010 BMW 335I 3.0L l6 Turbocharger Jm: status: in stock...(January 11th, 2026)
• Jm Turbo Technology Corp Jm-d-11 02 For Cummins H2e L10 Turbocharger (65.8% similar) This is normal. You blocked off the Turbo oil drain pipe with a piece of tape. Start it up and instant James bond smoke. When re-installing the Turbo, be sure that you take out any rags anything else used to block off inlet's or inter cooler hoses. If your Turbo does this, check the oil...(January 19th, 2026)