JM TURBO TECHNOLOGY 12709700074 Maxxforce Pressure 11/13/15 I783 Turbocharger

( Brand: Jm Turbo Technology ), ( Manufacturer Part Number: 12709700074 ), ( Oe/oem Part Number: 13879700030, 13879700035, 13879700066, 5011058r91 ), ( California Prop 65 Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm. ), ( Type: Turbocharger ), ( Features: Twin ), ( Custom Bundle: No ), ( Placement On Vehicle: Front ), ( Manufacturer Warranty: Yes )

Review JM TURBO TECHNOLOGY New For Maxforce Low Pressure Turbocharger fits 2009–2012

Introducing the JM Turbo 12709700074, a high-performance pressure turbocharger specifically designed for 2009-2012 Maxxforce 11, 13, and 15 I783 engines. This turbocharger, manufactured by JM Turbo, is an excellent upgrade for those seeking to enhance their engine's power output and overall performance.

The JM Turbo 12709700074 is a replacement turbocharger that comes with several upgrades and improvements compared to the original equipment manufacturer (OEM) part. It features a larger compressor wheel, which increases airflow and boost pressure. The larger turbine wheel also improves exhaust gas flow, resulting in quicker turbine response and increased engine power.

This turbocharger boasts a robust and durable construction, ensuring reliable performance even under heavy loads and high RPMs. The compressor housing and turbine wheel are made of high-strength materials, such as cast iron and high-temperature alloys, respectively. The turbocharger's bearings are also made of high-quality materials, such as ceramic and steel, to minimize friction and wear.

The JM Turbo 12709700074 comes with a new, high-performance wastegate that offers better control over boost pressure and improves throttle response. It also features an upgraded exhaust housing, which enhances exhaust gas flow and reduces backpressure, leading to increased engine efficiency and power output.

Installation of the JM Turbo 12709700074 is straightforward, with all necessary hardware included in the kit. The turbocharger is also compatible with factory wiring, making the installation process even simpler. However, it is recommended that the installation be performed by a professional mechanic to ensure proper alignment, tuning, and safety.

In summary, the JM Turbo 12709700074 is an excellent upgrade for those seeking to enhance the power and performance of their 2009-2012 Maxxforce 11, 13, and 15 I783 engines. Its larger compressor and turbine wheels, durable construction, and high-performance wastegate make it a reliable and effective turbocharger that delivers impressive results.

Pros and Cons of Buying JM Turbo 12709700074 for 2009-2012 Maxxforce 11/13/15 I783 Pressure Turbocharger

The JM Turbo 12709700074 is a popular aftermarket turbocharger choice for the 2009-2012 International Maxxforce 11/13/15 I783 engines. This turbocharger offers increased horsepower and torque, making it an appealing upgrade for diesel enthusiasts. In this analysis, we will discuss the pros and cons of purchasing this turbocharger for your International truck.

1. Increased Power: The JM Turbo 12709700074 is known for delivering significant horsepower and torque gains, which can lead to improved acceleration and overall engine performance.

2. Durability: This turbocharger is designed with high-quality materials and manufacturing processes, ensuring it can withstand the rigors of heavy-duty applications and long-term use.

3. Affordability: Compared to other aftermarket turbochargers, the JM Turbo 12709700074 is relatively affordable, making it an attractive option for budget-conscious enthusiasts.

4. Easy Installation: The turbocharger comes with all necessary hardware and instructions for installation, making the process straightforward for most DIY enthusiasts.

1. Potential for Increased Emissions: As with any performance upgrade, there's a risk of increased emissions, which may not meet regulatory requirements and could lead to fines or other penalties.

2. Potential for Noise: The JM Turbo 12709700074 may produce more noise than the stock turbocharger, which could be a concern for some users.

3. Potential for Vehicle Instability: Depending on the specific engine and application, the increased power output from this turbocharger could cause instability or other drivability issues.

4. Requires Additional Maintenance: Upgrading to a high-performance turbocharger like the JM Turbo 12709700074 may require more frequent maintenance to ensure optimal performance and longevity.

The JM Turbo 12709700074 is an attractive option for diesel enthusiasts seeking increased power and torque for their 2009-2012 International Maxxforce 11/13/15 I783 engines. While it offers several advantages, such as affordability, durability, and easy installation, it also comes with potential drawbacks, including increased emissions, noise, potential vehicle instability, and additional maintenance requirements.

If you are considering upgrading your International Maxxforce 11/13/15 I783 engine with a high-performance turbocharger, the JM Turbo 12709700074 is certainly worth considering. However, we recommend thoroughly evaluating your specific application, budget, and desired performance gains before making a purchase. Consult with a trusted diesel performance specialist or professional technician to help determine if this turbocharger is the right fit for your needs. Additionally, consider investing in emission control solutions to mitigate any potential increases in emissions.

Details:

Turbo Part Numbers, 3005700C93, 5011058R91, 3007664C94, etc. Your old Turbos Demise. There should be no play axially in and out with the compressor wheel shaft. Also a plugged up crank case vent will cause excessive pressure to build in the crankcase.

This is normal. As long as the wheel is not touching housing, you are fine. James Bond Smoke: You were doing some grinding or porting near the motor with Turbo removed. This is a direct bolt-on aftermarket Turbo.

This prevents the oil from draining out of Turbo and blows excess through seals. There is a gap between the shaft and sleeve housing. Parts must be in new, re-salable condition. Model: B2XG, B2NG, B3NS.

But if you killed a fairly new Turbo for no apparent reason, think about what could have been the cause of Turbos failure. These two gaps combined allow the compressor wheel tip to move side in what may look like an alarming amount. If your Turbo does this, check the oil drain for blockage, remove it and start up again. Same performance as the factory Turbo with better price.

Start it up and instant James Bond smoke. The oil flow into the Turbo has nowhere to go and gets pumped out bearing seals. You forget to take the piece of tape and install Turbo. Common Installation Problem: Compressor Wheel Damage.

The Shaft is Rocky. For Maxxforce 13 Turbo charger Naivest Twin B2XG B3NS LOW Pressure: Fit: Maxxforce 13/13.0L. Engine: I783, I766. When re-installing the Turbo, be sure that you take out any rags anything else used to block off inlet's or inter cooler hoses.

You blocked off the Turbo oil drain pipe with a piece of tape.

part #: 12709700074 prices

• $495.00-$600.00

specifications turbiparts:

• for years: 2009-2012
• brand: Jm Turbo Technology
• mpn: 12709700074
• oe/oem part number: 13879700030, 13879700035, 13879700066, 5011058r91
• california prop 65 warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Reproductive Harm.
• type: Turbocharger
• features: Twin
• custom bundle: No
• placement on vehicle: Front
• manufacturer warranty: Yes

payments turbiparts:

• wallet: Apple-pay
• other
• credit card: Visa

offer turbiparts:

• availability: In Stock
• options: Ship-to-home
• sold: 0
• started: September 10, 2025
• best offers: True
• quantity: 10

general turbiparts:

• Air Fuel Delivery > Turbos, Superchargers Intercoolers > Turbos Parts
• condition: New

seller turbiparts:

• # reviews: 5516
• city: Alhambra, California
• rating: 100.0%

returns turbiparts:

• paid by: Seller
• policy: Returns Accepted
• time: 30 Days

shipping turbiparts:

• cost: $0.00
• transit: 3-8 Days
• service: FedEx Ground / FedEx Home Delivery, FedEx Express Saver, FedEx 2Day, FedEx Standard Overnight
• class: Standard, Expedited, One-day
• type: Calculated
• carrier: FedEx

Jm Turbo Technology 12709700074 Is Similar To:

• Jm Turbo Technology Jm-c-06 1 For 3116 Caterpillar Engine Diesel Turbocharger (53.4% similar) As long as the wheel is not touching housing, you are fine. You forget to take the piece of tape and install Turbo. Your old Turbos demise. Application: caterpillar earth moving with 3116 engine. The oil flow into the Turbo has nowhere to go and gets pumped out bearing seals...(December 9th, 2024)
• Jm Turbo Technology Jm-f-twin6.4 Turbocharger For Ford F250 F350 Super Duty 6.4l 08-10 High Low Pressure (35.5% similar) James bond smoke: you were doing some grinding or porting near the motor with Turbo removed. Same performance as the factory Turbo with better price. For ford f-series 6.4L power stroke diesel 08-10 Turbo charger high low pressure pressure: fit: f-series F250, F350, F450, F550. You forget to take...(January 13th, 2025)
• Jm Turbo Technology 13879880003 New Turbocharger For International I766 Maxxforce 13 B3ns 2006-2009 (43.4% similar) When re-installing the Turbo, be sure that you take out any rags anything else used to block off inlet's or inter cooler hoses. The shaft is rocky. There should be no play axially in and out with the compressor wheel shaft. Also a plugged up crank case vent will cause excessive pressure to build...(February 21st, 2025)
• Fram Extra Guard C630 75-63 Engine Oil Filter For 1961-1970 Pontiac Tempest Change Jm (27.2% similar) Frame extra guard engine oil filter for 1961 -1970 Pontiac tempest change Jm: status: in stock...(March 16th, 2025)
• Jm Turbo Technology Jm-c-07 2 For 3126 Caterpillar C7 Charger Replacement (48.8% similar) Engine: caterpillar truck with c7 engine. These two gaps combined allow the compressor wheel tip to move side in what may look like an alarming amount. 3126 caterpillar c7 Turbo charger. Reference part numbers: 269-2919, 269-2920, 2692919, 10R3280, etc. There should be no play axially...(June 10th, 2025)
• Jm Turbo Technology Jm-d-3-3 91-04 Freightliner Fl50 60 70 For Cummins 6ct 8.3l I6 Hx40w T4 Turbocharger (51.2% similar) There is a gap between the shaft and sleeve housing. Flange size: T4. These two gaps combined allow the compressor wheel tip to move side in what may look like an alarming amount. This is normal. You blocked off the Turbo oil drain pipe with a piece of tape. James bond smoke: you were...(June 11th, 2025)
• Jm Turbo Technology Jm-t-7 8 Fit Toyota Supra Lexus Soarer Jzz30 Twin Turbocharger 1990-1996 Ct12 1jz-g (44.6% similar) This prevents the oil from draining out of Turbo and blows excess through seals. Parts must be in new, re-salable condition. This is normal. Your old Turbos demise. James bond smoke: you were doing some grinding or porting near the motor with Turbo removed. But if you killed a fairly new...(June 11th, 2025)
• Rein C151 34-60 Rear Turbo Oil Supply Line For 2007-2010 Bmw 335i 3.0l L6 Turbocharger Jm (41.5% similar) Rein rear Turbo oil supply line for 2007 -2010 BMW 335I 3.0L l6 Turbocharger Jm: status: in stock...(January 11th, 2026)
• Jm Turbo Technology Corp Jm-d-11 02 For Cummins H2e L10 Turbocharger (51.2% similar) This is normal. You blocked off the Turbo oil drain pipe with a piece of tape. Start it up and instant James bond smoke. When re-installing the Turbo, be sure that you take out any rags anything else used to block off inlet's or inter cooler hoses. If your Turbo does this, check the oil...(January 19th, 2026)