1. Car & Truck Turbos Parts Items
  2. sku: 13189401661322782
  3. MAXPEEDINGRODS WBKYP6

MAXPEEDINGRODS WBKYP6 Dual Ball Bearing Turbocharger Billet 660HP 0.70 0.72 A/r 3.55

Wbkyp6 Maxpeedingrods 660hp Dual Ball Bearing Turbocharger Upgraded Billet 0.70 0.72 A/r 3.55 V-band

( Brand: Maxpeedingrods ), ( Manufacturer Part Number: WBKYP6 ), ( Application: For 1.4l 3.0l Engine ), ( Bearing Type: Dual Ceramic Ball Bearing ), ( California Prop 65 Warning: California Prop 65 Warning ), ( Color: Silver ), ( Compressor: Compressor Inducer Diamter ), ( Compressor Exducer Diamter: 67.4mm ), ( Compressor A/r: 0.70 ), ( Compressor Air Inlet : 3 Inch ), ( Compressor Air Outlet: 2 Inch ), ( Compressor Wheel: Forged Cnc Full-machined Billet Aluminum Compressor Wheel ), ( Cooling Type: Water Oil Cooling ), ( Features: Individual ), ( Finish: Matte ), ( Horse Power: 350hp-660hp ), ( Manufacturer Warranty: 2 Year ), ( Oe/oem Part Number: Racing Turbo, Up To 660 Horsepower, Dual Ceramic Ball Bearing, Billet Compressor Wheel, Racing Turbocharger Turbolader Turbocompresor, Universal For 1.4l 3.0l Engine, Universal Turbo, 660 Turbo, 350hp-660hp ), ( Oil Inlet Size: 7/16-24 ), ( Oil Outlet Size: 13.5-2 M8 1.25 ), ( Oil Restrictor Size: 1mm ), ( Performance Part: Yes ), ( Placement On Vehicle: Front ), ( Steel Turbine Wheel: K419 Alloy, High Oxidation Stability And Resistance Up To 1000 ), ( Turbine: Turbine Inducer Diamter ), ( Turbine Exducer Diamter: 49.55mm ), ( Turbine Trim: 84 ), ( Turbine A/r: 0.72 ), ( Turbine Housing: Stainless Steel Turbine Housing, Resistant Up To 1020 ), ( Turbine Outlet: 3.55 Inch ), ( Type: Turbocharger ), ( Water Thread Size: M14 1.5 )

Review MAXPEEDINGRODS 660hp Dual Ball Bearing Turbocharger Upgraded Billet 0.70 0.72 A/r 3.55 V band

Introducing the Maxpeedingrods WBKYP6 660hp Dual Ball Bearing Turbocharger, a high-performance upgrade for your engine that is sure to deliver impressive power gains. This turbocharger, with its sleek billet design, is not just an aesthetic enhancement but a significant improvement in terms of power output and efficiency.

The Maxpeedingrods WBKYP6 is a 660hp turbocharger, making it an excellent choice for those looking to maximize power in their engine. It features a 0.70 0.72 a/r (area ratio) compressor and turbine housing, which is designed to provide optimal boost pressure at low and mid-range RPMs. This results in improved throttle response and increased power, allowing your engine to perform at its best.

The heart of this turbocharger is its dual ball bearing system. Ball bearings offer several advantages over other bearing types. They provide better efficiency, reduced friction, and increased durability. With the dual ball bearing design, the turbine and compressor shafts are supported on both ends, resulting in a more stable and efficient operation. This helps to reduce wear and tear, ensuring that the turbocharger lasts longer and performs reliably even under heavy use.

The Maxpeedingrods WBKYP6 660hp Dual Ball Bearing Turbocharger also comes with a 3.55 V-band outlet, making it compatible with a wide range of exhaust systems. This versatility is a significant advantage, as it allows for easy installation in various applications. Additionally, the V-band design offers a secure and leak-free connection, providing peace of mind and ensuring optimal performance.

In summary, the Maxpeedingrods WBKYP6 660hp Dual Ball Bearing Turbocharger is a high-performance upgrade that delivers impressive power gains and improved efficiency. Its sleek billet design, optimal 0.70 0.72 a/r compressor and turbine housing, durable dual ball bearing system, and versatile 3.55 V-band outlet make it an excellent choice for those looking to take their engine's performance to the next level.

Maxpeedingrods WBKYP6 660hp Dual Ball Bearing Turbocharger: A Detailed Analysis

The Maxpeedingrods WBKYP6 660hp Dual Ball Bearing Turbocharger is a high-performance component designed to enhance the power output of internal combustion engines. In this analysis, we will discuss the key features, advantages, and disadvantages of this turbocharger to help you make an informed decision.

Features:

1. 660hp power output

2. Dual ball bearing design

3. Billet construction

4. 0.70-0.72 A/R compressor wheel and turbine wheel

5. 3.55 V-band design

Advantages:

1. High power output: This turbocharger offers an impressive power output of 660 horsepower, making it suitable for high-performance applications.

2. Dual ball bearing design: Dual ball bearings provide better support and stability to the shaft, reducing the possibility of failure under extreme conditions.

3. Billet construction: Billet construction ensures greater strength and durability compared to cast components.

4. Efficient compressor and turbine wheels: The 0.70-0.72 A/R compressor and turbine wheels are designed for optimal efficiency, ensuring optimal power output and reduced heat buildup.

5. Versatile V-band design: The 3.55 V-band design allows for easy installation and removal.

Disadvantages:

1. Cost: This turbocharger is a high-performance component and comes with a premium price tag.

2. Complex installation: Installing a high-performance turbocharger like the Maxpeedingrods WBKYP6 requires specialized knowledge and tools.

3. Increased engine noise: Turbochargers can generate additional engine noise, which may not be desirable for all applications.

Conclusion:

The Maxpeedingrods WBKYP6 660hp Dual Ball Bearing Turbocharger is a high-performance component designed for high-power applications. Its advantages, such as high power output, dual ball bearing design, billet construction, and efficient compressor and turbine wheels, make it a popular choice among enthusiasts. However, its disadvantages, such as cost, complex installation, and increased engine noise, should be carefully considered before making a purchase.

Recommendation:

If you are looking for a high-performance turbocharger for your engine and have the necessary knowledge and resources for installation, the Maxpeedingrods WBKYP6 660hp Dual Ball Bearing Turbocharger is an excellent choice. However, if you are new to the world of performance upgrades or have limited resources for installation, it may be worth considering a less expensive or easier-to-install turbocharger. Ultimately, the decision depends on your specific needs, budget, and experience level.

Details:

Gasoline car must install a water cooling device to avoid overheating. High-Speed oil seal ring and Precision clearance. Horsepower: 350HP-660HP, Displacement: 1.4L-3.0L. For 1.4L- 3.0L engine displacements and capable of producing up to 660 horsepower.

Advanced Actuator Tester/Programmer. Make sure the oil drain line is lower than turbo itself. Before installing the new turbocharger, cause that led to failure of turbo must be analyzed and eliminated Package Included.

We established cooperation's with EM tron, Mote, LINK, Cartel, Him, etc. Replace, repair or reconnect air cleaner element per manufacturers manual to avoid compressor wheel damage. MaXpeedingrods has a longstanding commitment to the research of ECU, engine, gearbox and vehicle performance electronic calibration. 660 Racing Dual Ceramic Ball Bearing Billet V-Band Tu rbo.

Billet Compressor Wheel: Forged CNC full-machined billet aluminum compressor wheel provides a larger horsepower range and maximum boost response. MaXpeedingrods always follow the development concept that Success derives from devotion and happiness comes sharing to make contributes domestic overseas car tuning enthusiasts global racing culture by excellent products service. Bearing Type: Dual Ceramic Ball. Compressor, Compressor Inducer: 54.4mm, Exducer: 67.4mm, Trim: 65, A/R: 0.70, Air Inlet: 3 Inch, Outlet: 2 Inch.

This Turbo is not vehicle specific.

part #: wbkyp6 price

  • $596.97

specifications turbiparts:

  • brand: Maxpeedingrods
  • mpn: Wbkyp6
  • application: For 1.4l 3.0l Engine
  • bearing type: Dual Ceramic Ball Bearing
  • california prop 65 warning: California Prop 65 Warning
  • color: Silver
  • compressor: Compressor Inducer Diamter
  • compressor exducer diamter: 67.4mm
  • compressor a/r: 0.70
  • compressor air inlet : 3 Inch
  • compressor air outlet: 2 Inch
  • compressor wheel: Forged Cnc Full-machined Billet Aluminum Compressor Wheel
  • cooling type: Water Oil Cooling
  • features: Individual
  • finish: Matte
  • horse power: 350hp-660hp
  • manufacturer warranty: 2 Year
  • oe/oem part number: Racing Turbo, Up To 660 Horsepower, Dual Ceramic Ball Bearing, Billet Compressor Wheel, Racing Turbocharger Turbolader Turbocompresor, Universal For 1.4l 3.0l Engine, Universal Turbo, 660 Turbo, 350hp-660hp
  • oil inlet size: 7/16-24
  • oil outlet size: 13.5-2 M8 1.25
  • oil restrictor size: 1mm
  • performance part: Yes
  • placement on vehicle: Front
  • steel turbine wheel: K419 Alloy, High Oxidation Stability And Resistance Up To 1000
  • turbine: Turbine Inducer Diamter
  • turbine exducer diamter: 49.55mm
  • turbine trim: 84
  • turbine a/r: 0.72
  • turbine housing: Stainless Steel Turbine Housing, Resistant Up To 1020
  • turbine outlet: 3.55 Inch
  • type: Turbocharger
  • water thread size: M14 1.5

offer turbiparts:

  • options: Ship-to-home
  • best offers: True
  • started: March 21, 2026
  • sold: 0
  • availability: In Stock
  • quantity: 6

returns turbiparts:

  • policy: Returns Accepted
  • paid by: Seller
  • time: 30 Days

general turbiparts:

  • Air Fuel Delivery > Turbos, Superchargers Intercoolers > Turbos Parts
  • condition: New

payments turbiparts:

  • credit card: Diners-club
  • wallet: Apple-pay
  • other

shipping turbiparts:

  • cost: $0.00
  • class: Standard
  • type: Fixed
  • transit: 3-6 Days
  • service: Standard

seller turbiparts:

  • # reviews: 32725
  • city: Houston, Texas
  • rating: 99.3%
application: for 1.4l 3.0l engine, bearing type: dual ceramic ball bearing, california prop 65 warning: california prop 65 warning, compressor: compressor inducer diamter, compressor exducer diamter: 67.4mm, compressor a/r: 0.70, compressor air inlet: 3 inch, compressor air outlet: 2 inch, compressor wheel: forged cnc full-machined billet aluminum compressor wheel, cooling type: water oil cooling, features: individual, finish: matte, horse power: 350hp-660hp, manufacturer warranty: 2 year, oe/oem part number: racing turbo, up to 660 horsepower, dual ceramic ball bearing, billet compressor wheel, racing turbocharger turbolader turbocompresor, universal for 1.4l 3.0l engine, universal turbo, 660 turbo, 350hp-660hp, oil inlet size: 7/16-24, oil outlet size: 13.5-2 m8 1.25, oil restrictor size: 1mm, performance part: yes, placement on vehicle: front, steel turbine wheel: k419 alloy, high oxidation stability and resistance up to 1000, turbine: turbine inducer diamter, turbine exducer diamter: 49.55mm, turbine trim: 84, turbine a/r: 0.72, turbine housing: stainless steel turbine housing, resistant up to 1020, turbine outlet: 3.55 inch, type: turbocharger, water thread size: m14 1.5,
category: auto parts > air fuel delivery > turbos, superchargers intercoolers > turbos parts, color: silver, sku: 13189401661322782,

Maxpeedingrods WBKYP6 Is Similar To:

turbiparts logo
1 offer $596.97 USD
  • Offer #1: $596.97 price + $0.00 shipping estimate = $596.97* total. Billet Compressor Wheel: Forged CNC full-machined billet aluminum compressor wheel provides a larger horsepower range and maximum boost response. 660 Racing Dual Ceramic Ball Bearing Billet V-Band Tu rbo.FREE SHIPPING

Copyright © turbiparts.com